AVP-1 and Behringer mixer Xenyx1204FX

I can't seem to figure out why I'm getting some loud and feedback-like sound from my AVP-1. I have it hooked up to the mixer like the instructions said, but I just kind of a tinny sound...?

▶ Reply to This

Replies to This Discussion

Permalink Reply by Henrik Bridger on September 12, 2011 at 8:12am

Hello Dean,

If you are connecting the AVP-1 through the send and return connections, is there a possibility that you are sending the AVP-1 too high or low of a signal. Try experimenting with the AUX and Send/Return levels and I am pretty sure that this will solve what you are experiencing.

▶ Reply

RSS

Welcome to
Antares Community

Sign Up
or Sign In

Latest Twitter Posts

AntaresAudio: It's that time again. Today's the last day to get AVOX DUO Evo Vocal Modeling Auto-Doubler for only $29! Details here: http://t.co/CWSqXpAW

AntaresAudio: This week's AVOX special: Thru Thursday, get DUO Evo Vocal Modeling Auto-Doubler for only $29! http://t.co/CWSqXpAW

More…

Latest Antares News

Introducing Mic Mod EFX - Classic Microphone Modeler

Mic Mod EFX is a modern incarnation of our legendary Microphone Modeler plug-in. Mic Mod EFX lets the microphones you own sound like the microphones you wish you owned.

Check it out!

Introducing Auto-Tune 7

Auto-Tune 7 is the latest incarnation of the worldwide standard in professional pitch (and now time) correction. It features an extremely high quality (and incredibly easy to use) time manipulation system along with the second generation of Evo™ Voice Processing Technology and a host of new pitch correction features.

Learn all about it here.

Badges | Problem with the web-site? | Terms of Service